Artist-3d.com 3D Art Digital Fantasy Pictures: Free animated screensaver wallpapers. Best multimedia desktops online, cool flash downloads.

800x600
1023x768
1280x1024
widescreen
flash animated desktop installation:

Analog Computers An analog computer represents data as physical quantities and operates on the data by manipulating the quantities. It is designed to process data in which the variable quantities vary continuously (see analog circuit); it translates the relationships between the variables of a problem into analogous relationships between electrical quantities, such as current and voltage, and solves the original problem by solving the equivalent problem, or analog, that is set up in its electrical circuits. Because of this feature, analog computers were especially useful in the simulation and evaluation of dynamic situations, such as the flight of a space capsule or the changing weather patterns over a certain area. The key component of the analog computer is the operational amplifier, and the computer's capacity is determined by the number of amplifiers it contains (often over 100). Although analog computers are commonly found in such forms as speedometers and watt-hour meters, they largely have been made obsolete for general-purpose mathematical computations and data storage by digital computers.

Digital Computers A digital computer is designed to process data in numerical form (see digital circuit); its circuits perform directly the mathematical operations of addition, subtraction, multiplication, and division. The numbers operated on by a digital computer are expressed in the binary system; binary digits, or bits, are 0 and 1, so that 0, 1, 10, 11, 100, 101, etc., correspond to 0, 1, 2, 3, 4, 5, etc. Binary digits are easily expressed in the computer circuitry by the presence (1) or absence (0) of a current or voltage. A series of eight consecutive bits is called a "byte"; the eight-bit byte permits 256 different "on-off" combinations. Each byte can thus represent one of up to 256 alphanumeric characters, and such an arrangement is called a "single-byte character set" (SBCS); the de facto standard for this representation is the extended ASCII character set. Some languages, such as Japanese, Chinese, and Korean, require more than 256 unique symbols. The use of two bytes, or 16 bits, for each symbol, however, permits the representation of up to 65,536 characters or ideographs. Such an arrangement is called a "double-byte character set" (DBCS); Unicode is the international standard for such a character set. One or more bytes, depending on the computer's architecture, is sometimes called a digital word; it may specify not only the magnitude of the number in question, but also its sign (positive or negative), and may also contain redundant bits that allow automatic detection, and in some cases correction, of certain errors (see code; information theory). A digital computer can store the results of its calculations for later use, can compare results with other data, and on the basis of such comparisons can change the series of operations it performs. Digital computers are used for reservations systems, scientific investigation, data-processing and word-processing applications, desktop publishing, electronic games, and many other purposes.

Processing of Data The operations of a digital computer are carried out by logic circuits, which are digital circuits whose single output is determined by the conditions of the inputs, usually two or more. The various circuits processing data in the computer's interior must operate in a highly synchronized manner; this is accomplished by controlling them with a very stable oscillator, which acts as the computer's "clock." Typical computer clock rates range from several million cycles per second to several hundred million, with some of the fastest computers having clock rates of about a billion cycles per second. Operating at these speeds, digital computer circuits are capable of performing thousands to trillions of arithmetic or logic operations per second, thus permitting the rapid solution of problems that would be impossible for a human to solve by hand. In addition to the arithmetic and logic circuitry and a small number of registers (storage locations that can be accessed faster than main storage and are used to hold the intermediate results of calculations), the heart of the computer-called the central processing unit, or CPU-contains the circuitry that decodes the set of instructions, or program, and causes it to be executed.

Storage and Retrieval of Data Associated with the central processing unit is the storage unit, or memory, where results or other data are stored for periods of time ranging from a small fraction of a second to days or weeks before being retrieved for further processing. Once made up of vacuum tubes and later of small doughnut-shaped ferromagnetic cores strung on a wire matrix, main storage now consists of integrated circuits, each of which contains thousands of semiconductor devices. Where each vacuum tube or core represented one bit and the total memory of the computer was measured in thousands of bytes (or kilobytes, KB), each semiconductor device now represents millions of bytes (or megabytes, MB) and the total memory of mainframe computers is measured in billions of bytes (or gigabytes, GB). Random-access memory (RAM), which both can be read from and written to, is lost each time the computer is turned off. Read-only memory (ROM), which cannot be written to, maintains its content at all times and is used to store the computer's control information. Programs and data that are not currently being used in main storage can be saved on auxiliary storage, or external storage. Although punched paper tape and punched cards once served this purpose, the major materials used today are magnetic tape and magnetic disks, which can be read from and written to, and two types of optical disks, the compact disc (CD) and its successor the digital versatile disc (DVD). DVD is an improved optical storage technology capable of storing vastly greater amounts of data than the CD technology. CD-Read-Only Memory (CD-ROM) and DVD-Read-Only Memory (DVD-ROM) disks can only be read-the disks are impressed with data at the factory but once written cannot be erased and rewritten with new data. The latter part of the 1990s saw the introduction of new optical storage technologies: CD-Recordable (CD-R) and DVD-Recordable (DVD-R), optical disks that can be written to by the computer to create a CD-ROM or DVD-ROM, but can be written to only once; and CD-ReWritable (CD-RW), DVD-ReWritable (DVD-RW and DVD+RW), and DVD-Random Access Memory (DVD-RAM), disks that can be written to multiple times. When compared to semiconductor memory, magnetic and optical storage is less expensive, is not volatile (i.e., data is not lost when the power to the computer is shut off), and provides a convenient way to transfer data from one computer to another. Thus operating instructions or data output from one computer can be stored away from the computer and then retrieved either by the same computer or another. In a system using magnetic tape the information is stored by a specially designed tape recorder somewhat similar to one used for recording sound. In magnetic and optical disk systems the principle is the same except that the magnetic or optical medium lies in a path, or track, on the surface of a disk. The disk drive also contains a motor to spin the disk and a magnetic or optical head or heads to read and write the data to the disk. Drives take several forms, the most significant difference being whether the disk can be removed from the drive assembly.